เซนเซอร์วัดความสั่นสะเทือน Vibration Sensor Module Normally Opened Type SW18010P Vibration switch alarm sensor module

เซนเซอร์วัดความสั่นสะเทือน Vibration Sensor Module Normally Opened Type SW18010P Vibration switch alarm sensor module
เซนเซอร์วัดความสั่นสะเทือน Vibration Sensor Module Normally Opened Type SW18010P Vibration switch alarm sensor moduleเซนเซอร์วัดความสั่นสะเทือน Vibration Sensor Module Normally Opened Type SW18010P Vibration switch alarm sensor moduleเซนเซอร์วัดความสั่นสะเทือน Vibration Sensor Module Normally Opened Type SW18010P Vibration switch alarm sensor moduleเซนเซอร์วัดความสั่นสะเทือน Vibration Sensor Module Normally Opened Type SW18010P Vibration switch alarm sensor moduleเซนเซอร์วัดความสั่นสะเทือน Vibration Sensor Module Normally Opened Type SW18010P Vibration switch alarm sensor module
รหัสสินค้า RH-0449
หมวดหมู่ เซนเซอร์ (Sensors)
ราคา 60.00 บาท
สถานะสินค้า พร้อมส่ง
จำนวน
ชิ้น
หยิบลงตะกร้า
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay

เซนเซอร์วัดความสั่นสะเทือน Vibration Sensor Module Normally Opened Type SW18010P Vibration switch alarm sensor module 


 Module  use:

For a variety of vibration triggering, reported theft alarm, intelligent car, electronic building blocks.
Please note that this module triggers a very short time upon sensing a big shock, not enough to drive the relay, the data show that some people can be connected directly to the relay module, the practical application ineffective.

Module Description:

1. Use of the company's high sensitivity vibration switch SW-18010P default with vibration sensors.
2,.the comparator output signals clean, good waveform, driving ability, than 15mA
3. Working voltage of 3.3V-5V
4, the output form: digital switching output (0 and 1)
5, a fixed bolt hole for easy installation
6, small PCB board size: 3.2cm x 1.4cm
7, using a wide voltage comparator LM393
 
Module wiring instructions:
 
1.VCC: positive power supply
2.GND: negative one
3.DO: digital signal output
4.AO: With this shock sensor this function is invalid
 

Module Description:

1, when the product does not shock, vibration switch OFF state, the output of high output, the green light does not shine;
2, when the product is shock, vibration switch is turned on instantly, output of low output, the green indicator light;
3, the output can be directly connected to the microcontroller through the microcontroller to detect high and low, thereby detecting whether the environment there is vibration, play a role in the police

วิธีการชำระเงิน

เมื่อท่านได้ทำการรายการสั่งสินค้าเรียบร้อยแล้ว ท่านสามารถชำระเงิน โดยโอนเงินผ่านธนาคาร ตามรายชื่อบัญชีธนาคารข้างล่างนี้ เมื่อท่านได้โอนเงินผ่านบัญชีธนาคารเรียบร้อยแล้ว กรุณาแจ้งการโอนเงิน โดยไปที่หน้า แจ้งชำระเงิน แล้วกรอกเข้ามูลรายละเอียดในการโอนเงิน แต่ไม่ต้องแนบหลักฐาน เพื่อความสะดวกของลูกค้าครับหรือแจ้งผ่าน Line ID: raspberryhome หรือโทรแจ้งที่เบอร์ 081-619-1316 เมื่อทางร้านได้รับแจ้งและตรวจสอบการโอนเงินตามบัญชีที่ท่านเลือกโอนแล้ว ทางร้านจะส่งสินค้าไปยังท่านภายในวันเดียวกันทันทีครับ 


 

ข้อปฏิบัติในการส่งสินค้าของร้าน raspberryhome.net


ทางร้าน raspberryhome.net จะต้องจัดส่งสินค้า ภายในวันเดียวกันที่ลูกค้าแจ้งโอนเงิน  เพื่อให้สินค้าถึงมือลูกค้าเร็วที่สุด ถึงแม้ว่า สินค้านั้นจะเป็นสินค้าชิ้นเล็กๆ ชิ้นเดียวและมีราคาเท่าใด ก็ตาม 

โดยมีเงื่อนไขว่า สำหรับ วันจันทร์ถึงวันศุกร์ หากท่านแจ้งโอนเงินก่อนเวลา 14.00 น.  เราจะจัดส่งสินค้าให้ท่านภายในวันเดียวกัน หากท่านแจ้งโอนเงินหลังเวลา 14.00 น.  เราจะจัดส่งสินค้าทันทีในวันทำการถัดไป สำหรับ วันเสาร์ หากท่านแจ้งการโอนเงินก่อนเวลา 10.00 น. เราจะจัดส่งสินค้าภายในวันเดียวกันที่ท่านแจ้ง หากท่านแจ้งโอนเงินหลังเวลา 10.00 น. เราจะจัดส่งสินค้าทันทีในวันทำการถัดไป ส่วน วันอาทิตย์ งดส่งสินค้า แต่ลูกค้าสามารถสั่งซื้อสินค้าจากหน้าเวบได้ตามปกติครับ เราจะจัดส่งสินค้าทันที ในวันจันทร์หรือในวันทำการถัดไปครับ


เราให้ความสำคัญกับข้อปฏิบัตินี้ในระดับสูงสุดครับ

ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

มุมสมาชิก Member Corner

ติดต่อเรา Contact us

โทร. 081-619-1316

ประวัติการเข้าชม

หน้าที่เข้าชม860,946 ครั้ง
ผู้ชมทั้งหมด386,095 ครั้ง
เปิดร้าน6 ม.ค. 2560
ร้านค้าอัพเดท20 ต.ค. 2568